SOLENOID VALVES PIV IN LINE-- PIV.I Ø 8 MM IN LINE
PIV.I Ø 8 mm in line, 2/2 NC, M5 Ø 1,2 mm, Kv 0.65
PIV.I Ø. 8 mm in line, 2/2 NO, M5 Ø 1,4 mm, Kv 0.8
PIV.I Ø 8 mm in line, 3/2 NC, M5, Ø 1,2mm Kv 0.65
| Flow-rate at 6 bar DP 1 bar (Nl/min) | 42.9 |
| Insulation class | F 155 |
| Max drive frequency (Hz) | 30 |
| Max input pressure (bar) | 030 |
| Max temperature (°C) | 50 |
| Max torque for coil nut (Nm) | 1 |
| Min temperature (°C) | -15 |
| Protection degree | IP 65 EN60529 |
| Response time (ms) | 8÷15 |
| Threaded port | M5 |
| Time (Cycles) | 25 million |
| Voltage | 12VDC - 24VDC - 24VAC - 110VAC - 220VAC 50/60 Hz |
| Voltage tolerance | -10% ÷ 15% |
| Way scheme | 2 |
PIV.I Ø. 8 mm in line, 2/2 NO, M5 Ø 1,4 mm, Kv 0.8
| Flow-rate at 6 bar DP 1 bar (Nl/min) | 52.8 |
| Insulation class | F 155 |
| Max drive frequency (Hz) | 30 |
| Max input pressure (bar) | 010 |
| Max temperature (°C) | 50 |
| Max torque for coil nut (Nm) | 1 |
| Min temperature (°C) | -15 |
| Protection degree | IP 65 EN60529 |
| Response time (ms) | 8÷15 |
| Threaded port | M5 |
| Time (Cycles) | 25 million |
| Voltage | 12VDC - 24VDC - 24VAC - 110VAC - 220VAC 50/60 Hz |
| Voltage tolerance | -10% ÷ 15% |
| Way scheme | 2 |
PIV.I Ø 8 mm in line, 3/2 NC, M5, Ø 1,2mm Kv 0.65
| Flow-rate at 6 bar DP 1 bar (Nl/min) | 42.9 |
| Insulation class | F 155 |
| Max drive frequency (Hz) | 30 |
| Max input pressure (bar) | 010 |
| Max temperature (°C) | 50 |
| Max torque for coil nut (Nm) | 1 |
| Min temperature (°C) | -15 |
| Protection degree | IP 65 EN60529 |
| Response time (ms) | 8÷15 |
| Threaded port | M5 |
| Time (Cycles) | 25 million |
| Voltage | 12VDC - 24VDC - 24VAC - 110VAC - 220VAC 50/60 Hz |
| Voltage tolerance | -10% ÷ 15% |
| Way scheme | 3 |
